News
Introduction to Technical Diving Training. Schedule will be coordinated according to participant availability. Fifteen hours of submersion. All dives are filmed; corrections and detailed recommendations are made to each participant. |
UTD Adventurer LED II Light System - 5 Ah Li-Ion LED
The next level of primary LED lights is the result of combining newest single LED technology with the performance characteristics of the well proofed 18W HID lights and the patented LED I construction design. The new reflector installed inside the testtube gives out a clear penetrating and strong spot for perfect signalising even on long distances and a well illuminated corona. Reaching the beam characteristics of 18/21W HID heads has been the goal. The new reflector is made from a special combined aluminium and alloy, high polish. The measured lux values on 1m/3ft are 29.000 lux in the spot and 1600 lux in the corona. The measurements are taken with the LED reflector which has the same shape as the EKPP reflector but has a high polish surface. The lighthead can be used with other reflectors as well, but won`t give out the best focus result The new single chip LED is measured with about 1500 lumen. The cooling has been improved due to a slightly bigger body and new heat sink techniques. The slightly bigger backend belongs to the cooling surface and keeps the special designed converter, running at 96% efficiency. The backend is roughly 65% of the size of the 21W ballast. LED II works with DC voltages 12-16 V. The current draw is 2,4 A. The cutoff voltage is 10,8 V, it will dim down the output and flickers before it shuts of. All LED I lightheads can be upgraded to LED II. LED II is pressure resistant to 150m. LED II full fills CE requirements.Those are named in EN 60598-1 / EN 60598-2-6 / EN 62471 / EN 62031 / EN 61347-2-13 / EN 55015 and EN 61547. The electronic components full fill US-military shock resistance standards.
Features and Benefits LED II Light Head Specifications
5.2 amp Li-Ion Canister Specifications
- A 5.2 Ah Li-Po Battery Providing Approx. 210 Mins of Burn time for LED 1 and 105 min for LED II
- New Dry Lid is completely sealed providing protection from water intrusion due to a cut cord or switch boot
- Dry Weight 3.8 lbs.(1.6kg) 1.25 lbs(0.6 kg) Negative
- Recharge Time from Complete Discharge 2.5 hours
- Universal Input Charger. US Input Cord Provided, UK and European Input Cord Available
- Canister and Head Machined from Solid Rod Delrin
- 6.75"(18.2 cm) Length, 2.75"(7 cm) Diameter
- E/O Cord
A Good Choice!
TEKDIV Exploration is a guaranteed choice to fulfill your scuba diving objectives and aspirations for all competency levels, professionally and safely. |
B&B Tekdiv
Come dive the Thousand Islands in Ontario and stay at the beautiful "Bed & Breakfast" located near a multitude of outstanding dive sites. In the evening, take advantage of our night service of Air, Nitrox and Trimix fills on the spot!
|