Nouvelles
Formations récréatives personnalisées, étoffées et rigoureuses. Horaires adaptées à vos diponibilités. Le tout filmé et corrigé au fur et a mesure afin d'accroître la courbe d'apprentissage et les résultats escomptés. 20 heures de submersion. |
UTD Signature Series - Expedition Drysuit Heating System
Designed for technical/trimix divers who are committed to longer and deeper divers that require an extended decompression schedule and/or an overhead environment.This system includes your choice of external battery power.
- Heating Vest
- External Waterproof Canister with E/O Cord
- Choice of 5.2/10.4/20.8 amp Li-Ion Battery
- LiIon Universal Charger
- Choice of Permanant Throughport or Temporary Throughport
- E/O port Blank protective plug
Heating Vest
- Lightweight and flexible carbon fiber heating elements positioned carefully to provide consistent even heat specifically for divers needs
- Comfortable Rip Stop nylon shell with a soft taffeta lining
- 100g Polyfill insulation increases warmth and heat retention
- Solid sate electronically controlled thermostat easily and accurately adjusts through three heating levels, which provide a consistent and even heating system without risk of burning or On/Off or the Hot-Cold-hot-cold effect
- Temperature Setting - High 167ºF/75ºC, Med 150.8ºF/66ºC, Low
- Adjustable strap for attachment of thermostat to body
- Expanding side panels allow for a snug and comfortable fit and the diver to still be able to stretch and reach valves and so on.
- Water proof Heating Elements and wiring reducing risk of injury even with a flood suit
* Note you can selected to have fixed temperature (High) plug rather than the controllable thermostat
External Battery
- Provides 60mins or more of use time during diving or decompression*
- Batteries are housed external of the drysuit in an waterproof canister and can be integrated with your UTD Signature Series LED Lightning system.
- Includes a wet pluggable cord (E/O cord) to plug from your canister battery into your drysuit throughport
- Extra battery packs can purchased and used during multiples dive activities.
- Three battery sizes to choose from 5.2amp/10.4amp/20.8amp providing more use time
- Does not have to be present if internal battery is used
* Use time is based on temperature. setting used and size of battery.
Throughports - Permanent / Temporary
- Permanent through-ports must be easily permanently installed on the suit like a p-valve or inflate/dump valves.
- Temporary through ports are temporary added to the suit by placing it under the inlet valve and removed when not needed
- Wet plugged external E/O cord to allows for underwater plugging of the power source
- Internal waterproof connector to plug in heating vest
Specifications
Heated Vest
- 12- Volt DC
- Draw 4.2 Amps, 4.0 amps, 3.8 amps
- Temperature - High 167ºF/75ºC, Med 150.8ºF/66ºC, Low 125.6ºF/52ºC
- Carbon Fiber Heating Elements
- Rip Stop Nylon Shell
- Polyfill Insulation
- Controllable Thermostat (Can be exchanged for a fixed tempreture "Always On" plug. This means the heated vest can only be turned on and off with the external battery switch )
- 7 sizes. XXS-36, XS-38, S-40, Med-42, Large-44, XL-46, XXL-48, XXXL-50.
External Battery Canister - 5.2 amp Li-Ion Canister Specifications
- A 5.2 Ah Li-Po Battery Providing 210 Mins + (3.5 hours) of Burntime
- Dry Lid is completely sealed providing protection from water intrusion due to a cut cord or switch boot
- Dry Weight 4 lbs (1.8kg), 1.0 lbs (.5 kg) negative
- Recharge Time from Complete Discharge 3 hours
- Universal Input Charger. US Input Cord Provided, UK and European Input Cord Available
- Canister and Head Machined from Solid Rod Delrin
- 5.25"(27.2 cm) Length, 2.75"(7 cm) Diameter
- E/O Cord
External Battery Canister - 10.4 amp Li-Ion Canister Specifications
- A 10.4 Ah Li-Po Battery Providing 420 Mins +.(7 hours) of Burntime
- Dry Lid is completely sealed providing protection from water intrusion due to a cut cord or switch boot
- Dry Weight 5.8 lbs (2.6kg), 2.5 lbs (1.1 kg) negative
- Recharge Time from Complete Discharge 5 hours
- Universal Input Charger. US Input Cord Provided, UK and European Input Cord Available
- Canister and Head Machined from Solid Rod Delrin
- 10.75"(27.2 cm) Length, 2.75"(7 cm) Diameter
- E/O Cord
External Battery Canister - 20.8 amp Li-Ion Canister Specifications
- A 20.8 Ah Li-Po Battery Providing 840 Mins +.(14 hours) of Burntime
- Dry Lid is completely sealed providing protection from water intrusion due to a cut cord or switch boot
- Dry Weight 7 lbs (3.2kg) 3 lbs (1.6 kg) negative
- Recharge Time from Complete Discharge 12 hours
- Universal Input Charger. US Input Cord Provided, UK and European Input Cord Available
- Canister and Head Machined from Solid Rod Delrin
- 13.75"(27.2 cm) Length, 3.5"(8.8 cm) Diameter
- E/O Cord
Un bon choix!
TEKDIV Exploration est un choix garanti afin d'atteindre de façon professionnelle et sécuritaire, vos objectifs et vos aspirations en terme de plongée sous-marine et ce, peu importe votre niveau de compétence. |
B&B Tekdiv
Venez plonger dans les Mille-Îles en Ontario et logez au magnifique "Bed & Breakfast" localisé à deux pas d'une multitudes de sites de plongée exceptionnels. Terminé les pertes de temps! Le soir venu, nous vous offrons le service de remplissage de vos cylindres sur place!
|